[smythro]

Hi, I just found this site yesterday and have been playing around with creating the iso

I seem to be having some errors when creating the files. Any advice would be helpful. Thanks

FYI: I did use an OEM XP Pro SP3 CD to create my i386 install files..Here are the errors I'm getting:

Loading: C:\UBCD4WIN\BARTPE\I386\SYSTEM32\setuphiv
Error: loadKey() failed:
Processing INF file "C:\UBCD4Win\UBCD4WinBuilder.inf"

Saving hive: C:\UBCD4WIN\BARTPE\I386\SYSTEM32\SETUPREG.HIV
Saving hive: C:\UBCD4WIN\BARTPE\I386\SYSTEM32\CONFIG\SOFTWARE
Saving hive: C:\UBCD4WIN\BARTPE\I386\SYSTEM32\CONFIG\DEFAULT
Closing hive: C:\UBCD4WIN\BARTPE\I386\SYSTEM32\CONFIG\petmphive
Error: closeHive() failed: RegUnLoadKey (key="PEBuilder.exe-C:/UBCD4WIN/BARTPE/I386/SYSTEM32/CONFIG/petmphive") returned error 0: Access is denied.
Creating file: default.log
Creating file: sam

Creating file: software.log
Cleanup temporarily files
Error: DeleteFile() "C:\UBCD4WIN\BARTPE\I386\SYSTEM32\CONFIG\petmphive" failed
Error: DeleteFile() "C:\UBCD4WIN\BARTPE\I386\SYSTEM32\CONFIG\petmphive.log" failed
Error: DeleteFile() "C:\UBCD4WIN\BARTPE\I386\SYSTEM32\setuphiv" failed
Error: DeleteFile() "C:\UBCD4WIN\BARTPE\I386\SYSTEM32\setuphiv.log" failed
Collecting files


Checking for missing files
Warning: File "nvgts.sys" not found
Warning: File "nvrd32.sys" not found
Builder has stopped because there are 4 build errors
ISO image is not created, you must fix the errors!
Building done...
There where 4 errors and 3 warnings
Use the [<<] and [>>] buttons to jump to Error/Warning.

[dirkgently42]

That looks like the classic Dell CD problem...
http://www.ubcd4win.com/faq.htm#dell

This post has been edited by dirkgently42: 21 March 2009 - 01:36 PM

[doreen61596]

dirkgently42, on Mar 21 2009, 02:06 PM, said:

That looks like the classic Dell CD problem...
http://www.ubcd4win.com/faq.htm#dell

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I am having similar problems and followed the recommendation about building with the dell cd (http://www.ubcd4win.com/faq.htm#dell), but still getting the same error. I am using a dell XP CD SP2 and using my Toshiba laptop with vista to create the ISO file. Below is the summary of error Im getting; Please help...

Thank you

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

UBCD4Win PE Builder 3.1.10a
Copyright © 2004-2006 Benjamin Burrows.
Running OS Version: 5.1.2600 (Service Pack 2)
Source product is: Windows XP Professional
CD-Rom name is: Windows XP Professional Service Pack 2 CD
Microsoft Product Code: 76487
Product channel ID is: OEM
Warning: building from an OEM version of Windows can mean trouble...
Source build: 2600
Build process started
Removing directory: C:\UBCD4Win(2)\BartPE
Directory removed: C:\UBCD4Win(2)\BartPE
Building registry
Directory created: C:\UBCD4WIN(2)\BARTPE\I386
Directory created: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32
Directory created: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\CONFIG
Copying file "C:\XPCD\XP_MCE_SP2_ENG\I386\setupreg.hiv" to "C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\SETUPHIV"
Opening/creating the registry hives
Removing existing hive files
Loading: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\setuphiv
Error: loadKey() failed:
Processing INF file "C:\UBCD4Win(2)\UBCD4WinBuilder.inf"
Processing INF file: C:\UBCD4Win(2)\UBCD4WinBuilder.inf. section: SetupReg.AddReg

Processing INF file "C:\UBCD4Win(2)\plugin\System-Info\Information\wincpuid\wincpuid.inf"
Processing INF file "C:\UBCD4Win(2)\plugin\System-Info\Information\WUL\wul.inf"
Closing/saving the registry hives
Saving hive: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\SETUPREG.HIV
Saving hive: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\CONFIG\SOFTWARE
Saving hive: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\CONFIG\DEFAULT
Closing hive: C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\CONFIG\petmphive
Error: closeHive() failed: RegUnLoadKey (key="PEBuilder.exe-C:/UBCD4WIN(2)/BARTPE/I386/SYSTEM32/CONFIG/petmphive") returned error 0: Access is denied.
Creating file: default.log
Creating file: sam
Creating file: sam.log
Creating file: security
Creating file: security.log
Creating file: software.log
Cleanup temporarily files
Error: DeleteFile() "C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\CONFIG\petmphive" failed
Error: DeleteFile() "C:\UBCD4WIN(2)\BARTPE\I386\SYSTEM32\setuphiv" failed
Collecting files
Processing INF file "C:\XPCD\XP_MCE_SP2_ENG\I386\layout.inf"
Section: WinntDirectories
Section: SourceDisksFiles
Section: SourceDisksFiles.x86
Processing INF file "C:\UBCD4Win(2)\UBCD4WinBuilder.inf"
Section: SourceDisksFiles
Adding shared assemblies (WinSxS)
Processing (ASMS)

Append file "C:\UBCD4Win(2)\plugin\System-Info\Information\WUL\wul_nu2menu.xml" to "C:\UBCD4Win(2)\BartPE\Programs\Nu2Menu\nu2menu.xml"
Processing driver IDs
Checking for missing files
Builder has stopped because there are 2 build errors
ISO image is not created, you must fix the errors!
Building done...
There where 2 errors and 1 warnings
Use the [<<] and [>>] buttons to jump to Error/Warning.

[hilander999]

Make sure "Windows Defender" is turned off. (This program likes to turn itself back on at certain updates. )

Try building in safe mode.

[smythro]

it was the classic dell problem. I was able to get it straightend out today. The is a rights issue with some of the registry files. There is a microsoft file that needs to be downloaded along with a batch script that has to be created. I don't have it with me, but if it's still needed I can post links later....

[doreen61596]

smythro, on Mar 24 2009, 08:27 PM, said:

it was the classic dell problem. I was able to get it straightend out today. The is a rights issue with some of the registry files. There is a microsoft file that needs to be downloaded along with a batch script that has to be created. I don't have it with me, but if it's still needed I can post links later....

Yes please. If you can also post the step by step procedure that'll be really great coz Im not very good with computers. Thanks.

[smythro]

right from the link above

"What steps are necessary when building with a Dell CD?

There several problems that you can run into when using a Dell CD or system:
▫You receive a "missing xxxxx.xxx file when booting UBCD4Win. Your Dell CD may contain other drivers that are needed for the system you are trying to boot the project with. Please post a question in the forum, we will try to help with this error.
▫You receive building errors when trying to build UBCD4Win with the Builder. This is a registry problem instructions are below:
1. Download the subinacl tool from Microsoft. Install this tool to the default "C:\Program Files\Windows Resource Kits\Tools" folder.
2. Download this dellregfix.zip file, unzip it.
3. Copy your Dell XP CD to a folder such as "C:\dellxpcd".
4. In your "C:\dellxpcd" folder find where the "setupreg.hiv" file is. You need to copy the subinacl.exe file from the "C:\Program Files\Windows Resource Kits\Tools" folder and the dellregfix.cmd files to this folder.
5. Now run the dellregfix.cmd file. Make sure you ONLY run this CMD script from within your "C:\dellxpcd" folder!
This fix doesn't always work, I would give it a success rate of about 90%. If this does not work for you, please post in our support forum. We may be able to still help you. "

Look at the response above...the download links should work from there..

[doreen61596]

smythro, on Mar 25 2009, 08:08 AM, said:

right from the link above

"What steps are necessary when building with a Dell CD?

There several problems that you can run into when using a Dell CD or system:
▫You receive a "missing xxxxx.xxx file when booting UBCD4Win. Your Dell CD may contain other drivers that are needed for the system you are trying to boot the project with. Please post a question in the forum, we will try to help with this error.
▫You receive building errors when trying to build UBCD4Win with the Builder. This is a registry problem instructions are below:
1. Download the subinacl tool from Microsoft. Install this tool to the default "C:\Program Files\Windows Resource Kits\Tools" folder.
2. Download this dellregfix.zip file, unzip it.
3. Copy your Dell XP CD to a folder such as "C:\dellxpcd".
4. In your "C:\dellxpcd" folder find where the "setupreg.hiv" file is. You need to copy the subinacl.exe file from the "C:\Program Files\Windows Resource Kits\Tools" folder and the dellregfix.cmd files to this folder.
5. Now run the dellregfix.cmd file. Make sure you ONLY run this CMD script from within your "C:\dellxpcd" folder!
This fix doesn't always work, I would give it a success rate of about 90%. If this does not work for you, please post in our support forum. We may be able to still help you. "

Look at the response above...the download links should work from there..

I have done the above procedure already. and again attempted several times more but still unable to build the ISO image file. Does anyone still has any suggestion?

[thomasjk]

Try building in windows safe mode.

[rajmur]

I had the same problem. I added the following lines to the dellregfix.cmd

subinacl /subkeyreg Dell\ControlSet001\Services\nvrd32 /objectcopysecurity=Dell\ControlSet001\Services
subinacl /subkeyreg Dell\ControlSet001\Services\nvgts /objectcopysecurity=Dell\ControlSet001\Services
subinacl /subkeyreg Dell\ControlSet001\Services\sisraid4 /objectcopysecurity=Dell\ControlSet001\Services

Rerun dellregfix.cmd using the instructions that came with it. This solved my problem and the ISO file was created.

Hope this helps

This post has been edited by rajmur: 20 April 2009 - 01:16 PM

[Marton]

I had the same problem with my SP3 files (the setupreg.hiv errors when building).
To fix it, open a cmd window, CD to the I386 directory of your SP3 files and type:

reg load HKLM\DELL setupreg.hiv

Then open regedit and browse to:

HKEY_LOCAL_MACHINE\DELL\ControlSet001\Services, press the cursor down key to scroll down the list, and note every key which gives an "Error opening key" error.

When you wrote down all the keys that gave error, on the cmd window type:
reg unload HKLM\DELL

Then open dellregfix.cmd on notepad, and below this line:
reg load HKLM\DELL setupreg.hiv

Paste this:
subinacl /subkeyreg Dell\ControlSet001\Services\xxx /objectcopysecurity=Dell\ControlSet001\Services

Replace xxx with the key name that gave an 'Error opening key".
Paste the line as many times as necessary for all the keys that gave this error.

And finally run dellregfix.cmd

That's it!!!

Hope this helps

[pcuser]

http://www.ubcd4win.com/...o...ost&p=73139

Quote

The DellFix.cmd script is hardcoded to correct permission problems with the "iastor" registry key only. I just made a small program that looks for other keys with permission problems and dynamically constructs the subinacl command.

1. Download Reset.exe to your %XPCD%\i386 directory

2. Copy Subinacl.exe to your %XPCD%\i386 directory.

3. Run %XPCD%\i386\Reset.exe

Here's what Reset.exe does:

Loads %XPCD%\i386\SETUPREG.HIV into the registry at HKEY_LOCAL_MACHINE\dell then enumerates all keys under HKEY_LOCAL_MACHINE\dell\ControlSet001\Services and tries to open each one then writes a new subinacl line in reset.cmd for each key that fails and then finally runs reset.cmd and unloads SETUPREG.HIV and deletes SETUPREG.HIV.LOG if it exists.

Please let me know if this works for you.