Hey All,
haven't been around in a while but i wanted to know if UBCD supports USB external hard-drives and thumb drives? I have an older version (v3.0) but would be willing to upgrade in newer version support USB.
thx
Branco
Page 1 of 1
External Hard Drive And Ubcd
#2
Posted 30 August 2009 - 01:26 PM
BrancoBlace, on 30 August 2009 - 01:01 PM, said:
Hey All,
haven't been around in a while but i wanted to know if UBCD supports USB external hard-drives and thumb drives? I have an older version (v3.0) but would be willing to upgrade in newer version support USB.
thx
Branco
haven't been around in a while but i wanted to know if UBCD supports USB external hard-drives and thumb drives? I have an older version (v3.0) but would be willing to upgrade in newer version support USB.
thx
Branco
As far as I know it does. The drive needs to be attached/pluged in and powered on when the CD is booted.
Tom K.
#3
Posted 30 August 2009 - 02:39 PM
UBCD is a DOS based boot CD project and I don't know what it supports... this forum is for UBCD4Win and what thomasjk said applies to it. Do not refer to UBCD4Win as UBCD, they are not the same thing.
Plan A is always more effective when the device you are working on understands that Plan B involves either a large hammer or screwdriver....
#4
Posted 30 August 2009 - 02:42 PM
Quote
The drive needs to be attached/pluged in and powered on when the CD is booted.
You can also get UBCD4Win to recognize usb drives by clicking Start -> System -> HWPnP -> Force Install USB.
This post has been edited by ReadOnly: 30 August 2009 - 02:42 PM
#8
Posted 31 August 2009 - 08:52 AM
v3.0 was a complete overhaul of UBCD4Win and was the first version to include Preshell, Autobuild and the Systemcore. There have been many improvements since then so I suggest upgrading to something that's been released this century. I don't even know if I had a usb drive at the time that we were working on v3.0
If you're afraid of taking any chances then the chances are great that you will never learn anything
Multiboot Plugins - UBUSB (Ultimate Boot USB) - EzPcFix - RootKitty - Network Configuration Utility - UnIsoFS - A Small Linux Distro - SELogger - HashME - WSock - My Paypal
Multiboot Plugins - UBUSB (Ultimate Boot USB) - EzPcFix - RootKitty - Network Configuration Utility - UnIsoFS - A Small Linux Distro - SELogger - HashME - WSock - My Paypal
#9
Posted 31 August 2009 - 09:20 AM
I'm having some weirdness where I can plug in the USB drive before bootup, and UBCD4Win comes up just fine, recognizes the drive, assigns a drive letter, and I can create new text files on it, change the file, save it, open files that were already on the drive at bootup, etc. What I CAN'T do is Paste (or Drag-Drop or Send To...) files from the internal HD to the USB drive. It just ignores me as if I had never clicked anything. I can open/read/change the files on the internal HD, but whatever I try, I can't put any files onto the USB drive from the HD - which was the original point of getting UBCD4Win running!
Any suggestions?
Thanks,
JT
Any suggestions?
Thanks,
JT
#10
Posted 31 August 2009 - 09:45 AM
Quote
Any suggestions?
Use Unstoppable Copier.
If you're afraid of taking any chances then the chances are great that you will never learn anything
Multiboot Plugins - UBUSB (Ultimate Boot USB) - EzPcFix - RootKitty - Network Configuration Utility - UnIsoFS - A Small Linux Distro - SELogger - HashME - WSock - My Paypal
Multiboot Plugins - UBUSB (Ultimate Boot USB) - EzPcFix - RootKitty - Network Configuration Utility - UnIsoFS - A Small Linux Distro - SELogger - HashME - WSock - My Paypal
Page 1 of 1