UBCD4Win Forums: Dead Hdd - UBCD4Win Forums

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Dead Hdd need new logic board

#1 User is offline   bengt Icon

  • Skeptic
  • PipPipPipPipPipPip
    • Group: Donator/Beta Tester
    • Posts: 1,262
    • Joined: 16-December 05
    • Gender:Male
    • Location:Bork, bork, bork

    Posted 12 November 2009 - 11:34 AM

    Hi, I've toasted my HDD logic board (I think) the HDD refuses to spin. Any other HDD I have runs just fine on the same cable.
    I have checked the logic board and there are no visual signs of any short circuit or burns and I've opened the HDD case and examined its "guts" and no signs of shorts there either. I suspect it to be toasted anyway, any other ideas? The discs turns without resistance, the "arm" is mobile.

    What I need is to find a new (old) logic board with the exact same specs. for this drive to attempt a rescue of the data and I wonder if someone can point me to a possible vendor?

    The culprit is a:

    DiamondMax Plus 9
    80GB ATA/133 HDD

    Code YAR41BW0 N,M,C,D
    SN: Y3LN3JVE

    LBA: 160086528

    Mfg.Date: 27DEC2003


    On small stickers:


    #2 User is offline   pcuser Icon

    • Project Programmer
    • PipPipPipPipPipPipPip
      • Group: Moderator & Development
      • Posts: 3,889
      • Joined: 20-November 04
      • Gender:Male
      • Location:Kneebrasskee

      Posted 12 November 2009 - 02:47 PM

      Sorry bengt, I looked through all my drives and the only DiamondMax I have is a 150 SATA.
      If you're afraid of taking any chances then the chances are great that you will never learn anything

      Multiboot Plugins - UBUSB (Ultimate Boot USB) - EzPcFix - RootKitty - Network Configuration Utility - UnIsoFS - A Small Linux Distro - SELogger - HashME - WSock - My Paypal

      #3 User is offline   Adv. PC Sys. Icon

      • Member
      • PipPip
        • Group: Members
        • Posts: 31
        • Joined: 08-June 05

        Posted 12 November 2009 - 05:32 PM

        Hi bengt,

        I've had a lot of good luck with the following business on PCB replacement's.

        Access Computer Parts, Inc.

        My link

        Ask for Fred he can walk you through the the correct PCB and firmware match.

        Adv. PC Sys

        Page 1 of 1
        • You cannot start a new topic
        • You cannot reply to this topic

        1 User(s) are reading this topic
        0 members, 1 guests, 0 anonymous users