Need Advice Walk-Thru How To Set Up Cd Boot Comodo Rescue Disc Slipstreamed !

Need Advice Walk-Thru How To Set Up Cd Boot Comodo Rescue Disc Slipstreamed ! Comodo Rescue Disc SlipStreamed

#1 crownstar

Newbie

Group: Members
Posts: 5
Joined: 25-July 12

Posted 25 July 2012 - 07:50 PM

I d/led Comodo Rescue Disc which utilizes SliTaz GNU/Linux for LIve CD
Everytime I reboot with CD in drive it boots up and goes through the process.

then it says something like : Switching to NoHz Mode
then ACPI Exception : AE_NOT_FOUND
then ACPI No dock devices found
then ACPI : PCI Interrupt Link
then complete Total LOCKUP with GREEN SCREEN :

vgaarb : device added PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none

My system is :
MS Windows 7 Home Premium 64-bit SP1
Specification AMD Phenom" 9850 Quad-Core Processor
HP LP2465 (1920x1200[at]59Hz)
2048MB GeForce GT 520 (XFX Pine Group)

Version 4.2.0
Vendor NVIDIA Corporation
Renderer GeForce GT 520/PCI/SSE2

possible video collision driver issue ?

Regards,
Crown

#2 crownstar

Newbie

Group: Members
Posts: 5
Joined: 25-July 12

Posted 25 July 2012 - 07:52 PM

crownstar, on 25 July 2012 - 07:50 PM, said:

you can also use ubcd4win and download CCE and just slipstream it into the build - Jake

http://forums.comodo...-t38636.45.html

is this possible / true ?
if so i'm all ears !!!

#3 rdsok

rdsok

Group: Admin
Posts: 6867
Joined: 02-October 05
Gender:Male
Location:Norman, Ok. USA

Posted 25 July 2012 - 07:58 PM

I moved your post as it isn't BartPE related

#4 crownstar

Newbie

Group: Members
Posts: 5
Joined: 25-July 12

Posted 25 July 2012 - 08:13 PM

rdsok, on 25 July 2012 - 07:58 PM, said:

I moved your post as it isn't BartPE related

where can i find it ?

#5 rdsok

rdsok

Group: Admin
Posts: 6867
Joined: 02-October 05
Gender:Male
Location:Norman, Ok. USA

Posted 25 July 2012 - 08:15 PM

You are posting in it now... the path is listed above the thread itself

#6 crownstar

Newbie

Group: Members
Posts: 5
Joined: 25-July 12

Posted 25 July 2012 - 08:33 PM

rdsok, on 25 July 2012 - 08:15 PM, said:

You are posting in it now... the path is listed above the thread itself

Attempt running through Xboot / QEMU
TEXT MODE :

oRCU-based detection of stalled CPUs is disabled.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2511.589 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
502317 BogoMIPS (lpj=2511589)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Performance Events: Broken PMU hardware detected, software events only.
Checking for popad bug...OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20101013
Enabing APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
....(found apic 0 pin 2) ...
........ failed.
...trying to set up timer as Virtual Wire IRQ ...

#7 crownstar

Newbie

Group: Members
Posts: 5
Joined: 25-July 12

Posted 26 July 2012 - 03:09 PM

crownstar, on 25 July 2012 - 08:33 PM, said:

possible solution ? :

use following menu.lst entries to make it work

First : Copy the entire contents of the cd to a folder on your USB flash drive
example : K:\iso\Comodo\

menu.lst:
title Comodo Rescue Disk 1.1.232326.14
kernel /iso/comodo/boot/bzimage
initrd /iso/comodo/boot/rootfs.gz

Page 1 of 1

You cannot start a new topic
You cannot reply to this topic

UBCD4Win Forums: Need Advice Walk-Thru How To Set Up Cd Boot Comodo Rescue Disc Slipstreamed ! - UBCD4Win Forums