When building a ubcd4win iso I am constantly getting warnings about missing files and they seem to point to the mass storage drivers. What needs to be done to fix this issue? Here is the message I'm getting:
Processing driver IDs
Checking for missing files
Warning: File "3wareDrv.sys" not found
Warning: File "aar81xx.sys" not found
Warning: File "AACAD2.sys" not found
Warning: File "ADP3132.sys" not found
Warning: File "AACSAS02.sys" not found
Warning: File "cpqarry2.sys" not found
Warning: File "rr174xp.sys" not found
Warning: File "iastor70.sys" not found
Warning: File "MegaINTL.sys" not found
Warning: File "L4symmpi.sys" not found
Warning: File "Mraid2k.sys" not found
Warning: File "mvsata.sys" not found
Warning: File "nvgts5.sys" not found
Warning: File "nvrd325.sys" not found
Warning: File "nvgts6.sys" not found
Warning: File "fast2xxp.sys" not found
Warning: File "sata4302.sys" not found
Warning: File "FTTXR5_O.sys" not found
Warning: File "si3531.sys" not found
Warning: File "8Asi3124.sys" not found
Warning: File "SI3132B.sys" not found
Warning: File "SI3132B2.sys" not found
Warning: File "SI3132B3.sys" not found
Warning: File "SI3132B4.sys" not found
Warning: File "SI3132B5.sys" not found
Warning: File "3112Rx47.sys" not found
Warning: File "si3114r5.sys" not found
Warning: File "3124r5A.sys" not found
Warning: File "3124R5A2.sys" not found
Warning: File "3132R5C.sys" not found
Warning: File "3132R5C2.sys" not found
Warning: File "3132R5C3.sys" not found
Warning: File "3132R5C4.sys" not found
Warning: File "3132R5C5.sys" not found
Warning: File "SISRAIDX.sys" not found
Warning: File "VIBUS.sys" not found

Hi xtend


what version of project are you using 3.12 / 3.11 etc ?

in earlier versions driverspacknet mass storage drivers needed to be configured before use (before creating iso)

What version of Windows is your source operating system ?

regards

Mike Barnes

See this post http://www.ubcd4win.com/forum/index.php?s=&...ost&p=49540 which deals with a similar issue that happens on some Dell XP Windows disks... pay attention to the dellfix.inf portion where an example is given for 2 missing file warnings.

I figured it out. The cd I was using already had driverpacks integrated into it. I found the original cd and tried building the iso again and this time I got no warnings. 3.12 must not be compatible with a cd that was previously made with driverpacks integrated.

PE builds in general require that you use an unmodified Windows source... no additional drivers, updates or hotfixs or unknown results will likely happen.