When I used BartPE alone network would work but after installing UBCD4 I get this error "No Ethernet adapters were found on this machine". Anyone have any ideas?

Can you provide more details about your NIC card: Make and model please.

The NIC is an Intel Pro/1000 MT. When I used the Load Network Support(GUI) it will find the NIC but when I close and reopen open it the NIC is gone. When I use BartPE -pnp it says "No Drivernode found".

I think you need to disable the "911" plugins and also make sure you have my driver pack included as well.

I do have the driver pack installed. I will disable the 911 plugins I see only 2 plugins marked as 911EXP: Eventlog and MMC Eventlog veiwer and 911EXP: MMC...Thanks for the help!

I delete all the orginal BartPE plugins then installed UBCD4 disabled 911EXP plugins and it works!

Oh, so you didn't follow the original instructions in which it said to either rename or delete the original BartPE plugins? Yea, those can cause many problems... glad you got it working though.

I'm still sorry to report I really haven't figured out what is causing the issues with that damn plugin. I'm glad that we've figured out what is causing all of these issues. If nothing else, I guess we will have to remove this plugin from future versions....until we find a fix.

Hi,

I'm having similar problems getting networking to work. How do I disable 911 plugins? I have no idea what 911 plugins are, let alone how to disable them.

Thanks.

Open BartPE click Plugins highlight the 911 plugins and click disable.

I had the same problem (no network device found etc...) and after reading these posts I was able to fix the problem by disabling the 2 911EXP plugins.
Thank you guys for the info. Your help is appreciated.
New problem:
Now when I bootup the UBCD4Win I get an error message that I did not get before: "Windows Virtual Memory Minimum too low" - "Your system is low on virtual memory. Windows is increasing your virtual memory paging file. During this process, memory requests for some applications may be denied. For more information, see Help."
So I clicked OK and setup my network (IP address, subnet mask, gateway and DNS server. I went to Start>Programs>Applications>Firefox. Firefox loaded and it seemed to connect to Google.com (default) but the page does not load up. When I clicked on the menu bar up on top (i.e.: File, Tools etc...) nothing happened. When I clicked on a circle made up by dots in the upper right hand corner, it display that it goes to Mozilla.org but the page does not load up. The www. address bar does not display an address (i.e.:www.google.com).
I ping my network card, dsl router and a DNS server and I got replies from all.
Is this problem related to the Virtual Memory Problem?
When the network device was not working, I did not have the memory problem.
Thank you for any help you may provide, I will appreciate it.

Not sure about your memory issue. However, the FireFox problem is well known. Basically close FF after the first run (because it usually doesn't work) then open it again. It should work. We have a new plugin in the works that corrects this issue.

For the FireFox issue.. just close and re-open the browser. There may be a solution for this issue already.. search the forum to find out.

Can't address the virtual mem error, I haven't seen any other posts on that.. again I'd suggest the forum search just to see if I had missed them.

This is a common message when using a custom pebuilder CD to load all knids of software.

Windows XP is resource hungry as an OS & the "Preinstalled Envirionment" was never meant to replace
a full install of XP. At this point most of the limitations of PE have been overcome by using various tricks
& in short you can do just about anything with bart's pebuilder & a few good plugins.
However, the more you run (Processes, programs, drivers, ramdisk ect.ect..) the more memory it requires.

The more functions you add to a bartpe build will change the memory requirements.
To allow running more programs you should try using Paragliders "Setpagefile" plugin.
This can be set to use any size pagefile you want on an installed hard drive.

The default pagefile of 512mb works like a champ on systems that do not have enough memory.
http://www.paraglidernc.com/SetPageFile.html

WARNING: If you plan on using the CD to recover data from a hard drive you do not want to use
anything that writes to the drive or your chances of recovering what you need are drastically reduced.

Please provide some details as to the system you are having trouble with..
ie... Processor, ram, video card.

First of all I want to thank: SteelTrepid & rdsok. I tried closing & restarting FF and it worked. Thank you!

@hilander999:
Thanks for the info about the "Windows Virtual Memory Minimum too low". I went to the recommended site and more or less understand it. And I think that I could fill out the options for the file. The problem: what do I do after that and where does the file go? Do I need to create a folder for it in the "plugin" folder? Do I need to add or create other files to go with it? As you may have figured out I am kind of lost about it.
Also should I post somewhere else concerning this subject?
Thank you, your help is greatly appreciated.

Forgot:
Compaq Presario 1700T Notebook
Intel Pentium III Mobile CPU 1000Mhz
Win XP Home SP1
640MB Ram
About 2GB Virtual Mem / Paging File (min. + max.)
ATI Mobility Radeon AGP 8MB
20GB HD (about 7.25GB free)

The solution is HERE

DW

Get the file from paragliders plugin page.

The file SETPAGEFILE1008.CAB is an archive, like a zip only in the Microsft CAB format.
You can use what ever compression program you have to unpack it. (winzip, winrar, 7zip ect...)

Extract this file to is own folder inside your plugin folder. It will look something like this...

c:\pebuilder\plugin\SetPageFile1008
c:\pebuilder\plugin\SetPageFile1008\SetPageFile.htm
c:\pebuilder\plugin\SetPageFile1008\SetPageFile.inf
c:\pebuilder\plugin\SetPageFile1008\SetPageFile.xml

c:\pebuilder\plugin\SetPageFile1008\files
c:\pebuilder\plugin\SetPageFile1008\files\SetPageFile.exe

Thats all you need to do, the plugin is compleet & has menu entries for nu2menu included.
Just run pebuilder & rebuild.

Thank you DigiWiz !

Thank you Hilander999. I appreciate it. Sorry when I went to the webpage you referred me to only showed the "SetPageFile" file and parameter intructions. I later realized that I needed to download the compressed plugin file. SORRY...

You mentioned "WARNING: If you plan on using the CD to recover data from a hard drive you do not want to use anything that writes to the drive or your chances of recovering what you need are drastically reduced." My understanding: Do not use w/cloning (=recover data) software, correct?
How about Joshua's Preshell? Will it have the same effect when recovering data (If=cloning) as the SetPageFile plugin?
Thank you, you've been very helpful & kind.

What I meant by "Recover Data" was if you are trying to "Undelete" or "Recover Lost files".

Cloning is another good example.
Do not set a pagefile on the drive you are trying to clone. (The reasons should be obvious.)

Josua's preshell is the same in this regards, don't write anything to a drive with lost/deleted files.
The good thing about Josua's preshell is that you choose at boot time what options to use.

Thanks again Hilander999!
I'll read about Joshua's Preshell and try it since I'll have the option to choose at boot time.
Thank you.

If you use the setpagefile plugin without adding an autorun entry, it only adds entries to the menu.

This way is fine because you have to manually run it before it is loaded.

@ Hilander999

I tried SetPagefile plugin and it seems to work. The reason I say seems is that I thought it would create a file in my c: drive but when I search for it I can't find it. I guess it doesn't matter 'cause I don't seem to run out of mem.
I tried Joshua's Preshell and it did not work. Thought I'd let you know.
I do have a problem though (with Norton AV) and I've posted twice about it and no one seems to respond. Here's the link since it belongs elsewhere: http://www.ubcd4win.com/forum/index.php?showtopic=3060&st=15
Thank you very much for all the help you've provided me. I do appreciate it.

SORRY, I don't use norton products. So someone else will have to step in & help.

@Hilander999

Thank you, I appreciate it anyway!

By the way if you don't use Norton products what products do you use?

P.S. Latest update: I got it fixed.

I still like the old powerquest versions.
These are already paid for & still work flawlessly,
so I'm not going to spend another dime on it utill they stop working.

I use AVAST for a virus scanner.
I have had issues with other programs & so far this one has not let me down.

@Hilander
Thanks for the info. I appreciate it. I tried Avast! for my laptop and the free edition does not have script blocking and something else. Since I already had NAV 2004 and heard it was working with UBCD4Win, I wanted to try it.

I got your post about posting the solution and I posted it HERE