Hi All,

Have somebody succeed to build UBCD4Win 3.0 on a Flash USB Key.

At the End Of "PE2USB.CMD" for Building Flash USB Key With BartPE USB Installer V1.0.1, I have this message :



Missing one Operand !!!


Have you an Idea ?

Thanks for your Help !!!

Use the forum search for possible answers to this one... this has been discussed a lot but each system is different on what will and won't work... there is no way to list all the possible ways that will work in one post.

I also am having the same problem. If someone could post a way to get v.3 to work, it would be appreciated.

Here is the exact error I get. Someone please help!

G:\Bootv3.0>pe2usb i:

BartPE USB Installer v1.0.1
Copyright © 2005 Bart Lagerweij. All rights reserved.
This program is free software. Use and/or distribute it under
the terms of the Nu2 License.

USB target drive set to "I:"
Checking drive "I:"
Checking files...
Checking bootsector from drive I:
* Expert mode (-x)
* Inspect mode (-i)
Checking Boot sector information
Boot sector type is "FAT"
Signature=55AAh, OK
Jump instruction=EB, OK
Jump offset=3C, OK
OEM ID="MSDOS5.0"
Bytes per sector=512, OK
Sectors per Cluster=32
Reserved sectors=4
Number of FATs=2, OK
Root entries=512
Media Descriptor=F8h
Sectors per FAT=250
Sectors per Track=63
Number of Heads=255
Hidden Sectors=63
Large Sectors=2047937 (0.98GB)
Physical Drive Number=80
Reserved=00h
Extended Boot Signature=29h, OK
Volume Serial Number=7C32C0A7h
Volume Label="NO NAME "
System ID="FAT16 "
Boot sector looks OK!
Copying G:\Bootv3.0\srsp1\ramdisk.sys to G:\Bootv3.0\BartPE\i386\system32\drive
s
1 file(s) copied.
Copying G:\Bootv3.0\srsp1\setupldr.bin to I:\ntldr
1 file(s) copied.
Copying G:\Bootv3.0\BartPE\i386\ntdetect.com to I:\
1 file(s) copied.
Building I:\winnt.sif
Generating ISO image I:\bartpe.iso

Ready!

Missing operand.
ISO image size is MB
*******************************************************************************
You should be able to boot this on systems with at least 64MB of memory!
*******************************************************************************

Done (program will be closed)
Press any key to continue . . .

It looks like a problem with the wrapper (fake mkisofs.exe) autobuild uses &

fixed paths that have been changed.

Try this, but I did it in a hurry so it might need more attention. Let me know if it works.


http://toms.homelinux.org/hilander999/deve.../pe2usb.cmd.txt

Anyone try this yet? We are trying to get all the little quirks taken care of for a minor update release.

Please test this & let me know if this file solves the problem.

i tried it and it doesn't work either...this is the error message that i get now...
G:\Bootv3.0>pe2usb i:

BartPE USB Installer v1.0.1
Copyright © 2005 Bart Lagerweij. All rights reserved.
This program is free software. Use and/or distribute it under
the terms of the Nu2 License.

USB target drive set to "I:"
Checking drive "I:"
Checking files...
Checking bootsector from drive I:
* Expert mode (-x)
* Inspect mode (-i)
Checking Boot sector information
Boot sector type is "FAT"
Signature=55AAh, OK
Jump instruction=EB, OK
Jump offset=3C, OK
OEM ID="MSDOS5.0"
Bytes per sector=512, OK
Sectors per Cluster=32
Reserved sectors=4
Number of FATs=2, OK
Root entries=512
Media Descriptor=F8h
Sectors per FAT=250
Sectors per Track=63
Number of Heads=255
Hidden Sectors=63
Large Sectors=2047937 (0.98GB)
Physical Drive Number=80
Reserved=00h
Extended Boot Signature=29h, OK
Volume Serial Number=30322C35h
Volume Label="NO NAME "
System ID="FAT16 "
Boot sector looks OK!
Copying G:\Bootv3.0\srsp1\ramdisk.sys to G:\Bootv3.0\BartPE\i386\system32\driver
s
1 file(s) copied.
Copying G:\Bootv3.0\srsp1\setupldr.bin to I:\ntldr
1 file(s) copied.
Copying G:\Bootv3.0\BartPE\i386\ntdetect.com to I:\
1 file(s) copied.
Building I:\winnt.sif
Generating ISO image I:\bartpe.iso
Warning: Creating ISO-9660:1999 (version 2) filesystem.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.

/cygdrive/g/Bootv3.0/temp/mkisofs: Uh oh, I cant find the boot image 'bootsect.b
in' !
Error: mkisofs failed!

Aborted...
There was an error, script aborted!!!


I changed this part of the command:


"%_base%temp\mkisofs.exe" -iso-level 4 -force-uppercase -volid "BartPE" -b bootsect.bin -no-emul-boot

to

"%_base%\mkisofs.exe" -iso-level 4 -force-uppercase -volid "BartPE" -b bootsect.bin -no-emul-boot

then i got this....


G:\Bootv3.0>pe2usb i:

BartPE USB Installer v1.0.1
Copyright © 2005 Bart Lagerweij. All rights reserved.
This program is free software. Use and/or distribute it under
the terms of the Nu2 License.

USB target drive set to "I:"
Checking drive "I:"
Checking files...
Checking bootsector from drive I:
* Expert mode (-x)
* Inspect mode (-i)
Checking Boot sector information
Boot sector type is "FAT"
Signature=55AAh, OK
Jump instruction=EB, OK
Jump offset=3C, OK
OEM ID="MSDOS5.0"
Bytes per sector=512, OK
Sectors per Cluster=32
Reserved sectors=4
Number of FATs=2, OK
Root entries=512
Media Descriptor=F8h
Sectors per FAT=250
Sectors per Track=63
Number of Heads=255
Hidden Sectors=63
Large Sectors=2047937 (0.98GB)
Physical Drive Number=80
Reserved=00h
Extended Boot Signature=29h, OK
Volume Serial Number=30322C35h
Volume Label="NO NAME "
System ID="FAT16 "
Boot sector looks OK!
Copying G:\Bootv3.0\srsp1\ramdisk.sys to G:\Bootv3.0\BartPE\i386\system32\driver
s
1 file(s) copied.
Copying G:\Bootv3.0\srsp1\setupldr.bin to I:\ntldr
1 file(s) copied.
Copying G:\Bootv3.0\BartPE\i386\ntdetect.com to I:\
1 file(s) copied.
Building I:\winnt.sif
Generating ISO image I:\bartpe.iso

Ready!

ISO image size is 0MB
*******************************************************************************
You should be able to boot this on systems with at least 64MB of memory!
*******************************************************************************

Done (program will be closed)
Press any key to continue . . .


only problem is that the ISO should be bigger than 0MB....

let me know if you got anything else.

thanks

Hi msmucny,

I have the same error than you :

............................................................................................................................................
Copying G:\Bootv3.0\srsp1\setupldr.bin to I:\ntldr
1 file(s) copied.
Copying G:\Bootv3.0\BartPE\i386\ntdetect.com to I:\
1 file(s) copied.
Building I:\winnt.sif
Generating ISO image I:\bartpe.iso
Warning: Creating ISO-9660:1999 (version 2) filesystem.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.

/cygdrive/g/Bootv3.0/temp/mkisofs: Uh oh, I cant find the boot image 'bootsect.b
in' !
Error: mkisofs failed!

Aborted...
There was an error, script aborted!!!
********************************************************************************


You can see another test at this thread :

http://www.911cd.net/forums//index.php?sho...t=&#entry115344

Thanks for your Help !!!

@ eeik

I'm not sure what the USB flash key is but I have made a bootable USB thumb drive with UBCD4Win 3.0 using a "all in one tool." Maybe you can try it on the flash key to see if it will work.

You create your build as normal and then use the tool. Select the build folder as the source and then your USB device as the destination. Thats all there is to it & it will creat a bootable USB device.

See the link below.

http://www.911cd.net/forums//index.php?showtopic=16543

Hope this helps!

Hello Rwnickster,

I have tried with "BartPE 1.4 AIO" and I have a Blue Screen !!! I will try again and i tell you about.

Thanks for your reply and advices !!!

I too get the same blue screen. something about "session 5 not initialized"

i hope we get this working soon...

mike

In highlander999's post above with the corrected PE2USB file linked in it... edit the following line...



and change it to...



I've tested this and the build completes but I don't have the required memory ( in my build 560Mb ) to attempt running it so this will need further testing...

it builds but i still get the "session 5 initialization failed" blue screen.

Hello Msmucny,

I have the same Problem then U !!! I use a Computer with a Mother Card "ASUS A8N-E" and 2 Go of Ram. the ".Iso" need 470 Mo of Ram.