Error while writing BartPE.ISO in to a CD/WR, writing error (3) Options

[Wanabe-Genuies]

when i built the BartPE there were no errors or warnings....but when i wanted to write the BartPE.iso in to the CD/WR, this is the message i got. ''writing error: (3) error occured writing data to disc. writing error of unknown origin (1005). error sense data: SENSE KEY: error sense data: SENSE KEY: 3 ASC: C ASCQ: 0''.

could some help me plz......thank you!!

This post has been edited by Wanabe-Genuies: Oct 8 2005, 05:08 PM

[SteelTrepid]

Have you tried burning the ISO any other way??

Weird things can happen with any software, that's why the site recommends you use another burning application instead of the one built into PE Builder. Use other software and let us know how if that works.

[Wanabe-Genuies]

i have tried using both ''Nerostartsmart'' and ''CD Burnerxp pro3'' yet still get the following message. ''write error, invalid write state, could not perform ENDTRACK''. i have no clue what is happing. see if you have any ideas. thanks for the reply....cheers!!!

This post has been edited by Wanabe-Genuies: Oct 8 2005, 05:41 PM

[hilander999]

Make sure you are burning the ISO as an IMAGE, not a file.
In NERO choose recorder\burn image.

>Have you added anthing that would make the ISO too large to fit on the CD?
What size is your current ISO file?

>Try using a different speed for burning. Try at 12x or 24x instead of max speed.

>Are you sure the media you are using is good?
I found that some of the MAXTOR COLLORS CD's (1 in 5) do not work & switched to another brand.

Try burning any other data to a CD, just to make sure your drive did not bite the dust.

[dirkgently42]

Please try the config tool. :)

This post has been edited by dirkgently42: Oct 8 2005, 08:24 PM

[stidyup]

Try burning the ISO with this tool.

BurnCDCC - http://www.terabyteunlimited.com/utilities.html

The only thing it will do is burn ISO files so not much should go wrong.

[forkart]

when i built the BartPE there were no errors or warnings....but when i wanted to write the BartPE.iso in to the CD/WR, this is the message i got. ''writing error: (3) error occured writing data to disc. writing error of unknown origin (1005). error sense data: SENSE KEY: error sense data: SENSE KEY: 3 ASC: C ASCQ: 0''.

could some help me plz......thank you!!

Try to use magiciso built-in ISO burner to burn iso image to cd. it works fine for me.

http://www.magiciso.com/tutorials/miso-burnwin.htm

[Wanabe-Genuies]

when i built the BartPE there were no errors or warnings....but when i wanted to write the BartPE.iso in to the CD/WR, this is the message i got. ''writing error: (3) error occured writing data to disc. writing error of unknown origin (1005). error sense data: SENSE KEY: error sense data: SENSE KEY: 3 ASC: C ASCQ: 0''.

could some help me plz......thank you!!

Try to use magiciso built-in ISO burner to burn iso image to cd. it works fine for me.

http://www.magiciso.com/tutorials/miso-burnwin.htm

Hi there!!!! i had the same problem, i used a CD RW which i formated many time...so i tried a brand new cd and that worked....so my advice is that u try a new cd r/rw..or a different burning software (CD Burnerxp pro3)... c what happens....

[LittlBUGer]

I've never had any problems with Nero and CD-RWs or DVD-RWs. :)