I have the above referenced m/b. I see the Promise FastTrack 378 and SATA378 drivers in the drivers addon. I also see the VIA Raid drivers. I have a single SATA drive that is not detected by UBCD4Win.

I know everything is compiled properly (I forgot to add the drivers on first round and my Marvell Yukon NIC failed to start. I added the entire driver package and the Yukon is now operational on my second attempt at a bootable ISO)

Is there a way to enable storage support manually from within UBCD4Win?

Other than trying to manually add the correct drivers again before you build the CD, there's not much more you can do. I will look into the driver issue though and either get new ones and replace the old or try to fix the current ones in the drivers add-on. Thanks for the info.

If all else fails, get the drivers with the TXTSETUP.OEM file on a disk and press F6 as the CD is booting up to be able to load the drivers that way (at least I think that sitll works...).

I did find some discrepencies with the Promise drivers so I'm updating those for the next release. As for the VIA ones, though I doubt you'll need those, are already completely up-to-date and ready in the current (0.5) release. Hopefully that will help.

Thanks for the reply!

I have the driver disks from my original install. I'll try the F6 gambit this weekend.